The new and innovative DC Power Link is a purpose-built device, which acts as a ‘Power Board’ and digital multi-meter for 12V and 24V devices.
Connecting power from one 12V/24V power source to three individual devices
The DC Power Link can connect power from one 12V/24V power source to three individual devices. You can view volts, amps, watts, battery percentage and amp hours of connected devices via the integrated Smart-Touch LCD Screen and view statistics both at an individual circuit level or as a complete overview of the total load on the power source.
Devices and power source are connected via 50A heavy-duty connectors and the unit also features USB inputs for charging USB devices.
The DC Power Link is suitable for camping, marine, 4WD, caravanning and recreational activities and can be used for a range of 12V/24V purposes including fridges/freezers, lighting, satellite TVs, air compressors or charging phones and tablets via the integrated USB Inputs.
KT Cables says its continual commitment to innovation and the development of the DC Power Link has provided consumers with a complete solution to power and monitor their devices and has revolutionised the Australian Automotive Aftermarket Industry.
The DC Power Link features many attributes, which KT Cables say are not currently available in the one device. Advantages are:
- Monitoring volts, amps, watts, battery percentage and amp hours
- Custom designed one-piece body moulded from UV stabilised polycarbonate/ABS hybrid material (added durability and UV stable)
- Design registered and designed by KT
- Suitable for use with grey, red, blue and black 50A heavy-duty connectors
- LED indicators to show active circuits
- Ability to charge USB devices
- Dustproof and splash proof covers
- Smart-Touch LCD technology
- Mounting points with hardware provided
- New, innovative and functional packaging
- Comprehensive instructional manual and online support
- Marketing assistance to retailers
Using the DC Power Link is simple. Once switched on and devices are connected, the DC Power Link will automatically cycle through each individual circuit in a clockwise direction, providing a ‘live reading’ of electrical information for a period of 10 seconds. A flashing LED indicates which circuit it providing the readings on screen. After providing a reading for all devices, the DC Power Link will display the total load capacity of all three ‘output’ connections and then the display will automatically turn off and the full cycle is complete (40 seconds). The screen is easily reactivated by a soft touch of the LCD display.
Outputs can be turned ‘on’ or ‘off’ individually, or all outputs may be turned ‘on’ or ‘off’ all at the same time via a simple touch of the Smart-Touch LCD.
No comments: